Skip to main content
Figure 1 | Journal of NeuroEngineering and Rehabilitation

Figure 1

From: Design and evaluation of a low-cost instrumented glove for hand function assessment

Figure 1

Top side view of the NeuroAssess Glove. The glove has integrated sleeves into which the sensors were inserted. Four 2-in sensors were used to monitor finger bending of the index MCP, PIP, DIP and thumb IP joints, and two 3-in sensors were used to capture palmar and dorsal flexion of the wrist. The sensors' proximal ends were fixed to the glove with medical tape to avoid displacement during finger motion monitoring. For the sake of clarity, the medical tape is not shown in this figure.

Back to article page