Skip to main content
Fig. 12 | Journal of NeuroEngineering and Rehabilitation

Fig. 12

From: Model-based control for exoskeletons with series elastic actuators evaluated on sit-to-stand movements

Fig. 12

Exoskeleton transparent control evaluation. The joint torque analysis for the transparent condition is shown (condition T). The top three subfigures (a to c) show the joint torque for the hip, knee and ankle for one STS motion. The desired joint torque τdes,spr is shown in blue. This desired spring torque is torque needed to compensate the exoskeleton. The measured spring torque \(\widehat {\boldsymbol {\tau }}_{spr}\) is represented in red. The torque to accelerate the motor inertia is given in yellow. Seat-off occurs at the black dashed line. The lower three subfigures (d to f) show the average error (difference) and the band of standard deviation (±σ) between the desired τdes,spr and the delivered \(\widehat {\boldsymbol {\tau }}_{spr}\) spring torques for all the STS motions of condition T

Back to article page